Remove the number plate holder complete with the rear light from the frame.
Secure the number plate holder to the rear frame with a cable tie or similar.
Remove the screws securing rear light (2).
Disconnect the plug of the rear light.
Installation is the reverse of the removal procedure: pay particular attention to the following.
Colours of the wires in the housing for tail light/ brake light:
- 1. green-red
- 2. blue-black
- 3. brown
Tightening torques:
- Rear light cluster to number-plate carrier: 4 Nm
- Number-plate carrier to rear mudguard: 3 Nm