Caution! Do not allow brake fluid to come into contact with painted parts of the motorcycle as brake fluid destroys paint.
Drain the brake system.
Disconnect brake line (1).
Remove screws securing the brake caliper.
Force back the brake pads and pistons (arrows).
Caution! Do not damage brake pads.
Carefully remove the brake caliper.
Installation is the reverse of the removal procedure.
Force back the brake pads and pistons.
Fill and bleed the brake system.
Caution! Replace the sealing rings (2) in the brake line. Do not damage brake pads.
Tightening torque:
- Brake caliper to fork slider tube — 40 Nm
- Brake hose to brake caliper — 18 Nm
- Bleed screw to brake caliper — 14 Nm