Caution!
- Switch off ignition.
- Disconnect earth (ground) lead from battery.
- Insulate earth (ground) lead.
Remove the indicator lenses, disconnect plug and pull the cable through the indicator mount.
Remove the turn indicators.
Remove top section of mudguard.
Remove windscreen.
Remove top cover.
Remove headlight glass (1).
Remove headlight holder and disconnect plug.
Remove headlight holder complete with headlight (2).
Release instrument cluster (3) and pull it up until it is clear of the front mount.
Note: Carefully pull thrust pad (5) on bracket of instrument carrier out of the front mount (4).
Release left or right oil cooler line.
Remove fasteners securing oil cooler and swing it aside; fix it in position with a cable tie if necessary.
Remove the front mount.
Release the wiring harness from fairing bracket (6).
Remove fairing bracket (6).
Installation is the reverse of the removal procedure.
Tightening torque:
- Front mount to fairing bracket — 8 Nm
- Fairing bracket to frame — 21 Nm
- Horn to holder (clean thread + Loctite 243) — 10 Nm