Removing and installing the seat (Honda VTX1800C)

0

To service the battery, the seat must be removed.

Removing the seat

1. Remove the seat mounting screws (1), remove the nut (2) and a puck (3).

2. Slide the seat (4) back and up.

Seat installation

1. Insert the tongue (5) seats in frame hinge.

2. Tighten the seat mounting screws, nut and washer.

3. Tighten the seat mounting screws and nut securely.

See this article in russian language

Article about repair motorcycles «Honda VTX series VTX 1800 C» (2001-2008): «Removing and installing the seat»: https://motoinstruction.ru/en/Honda/VTX/1800C/owner/devices/112227 <a href="https://motoinstruction.ru/en/Honda/VTX/1800C/owner/devices/112227">Removing and installing the seat</a> - article about repair motorcycles «Honda VTX series VTX 1800 C» (2001-2008) from section «Control devices». [url=https://motoinstruction.ru/en/Honda/VTX/1800C/owner/devices/112227]Removing and installing the seat[/url] - article about repair motorcycles «Honda VTX series VTX 1800 C» (2001-2008) from section «Control devices».