Level balancing stand, BMW No. 36 3 600, using knurled-head screws and bubble gauge (5/6).
Install balancing shaft (1), BMW No. 36 3 606, with measuring bushing (2), BMW No. 36 3 616, and nut (3), in front wheel bearings.
Lightly preload bearing with knurled nut (3).
At the rear wheel, attach mounting fixture (4), BMW No. 36 3 613, on the centering collar side with the wheel studs and shims, then install the balancing shaft.
Allow wheel to settle.
Clean the attachment points for the adhesive weights.
Affix the adhesive weights (7) uniformly spaced on both sides of the rim opposite the wheel’s heaviest point.
Caution! Maximum balancing weight 80 g (2.82 oz).
Repeat the balancing procedure as a check.