![](https://motoinstruction.ru/img/bmw/6/114063.jpg)
Fit the front wheel.
Install the spacing bushing and speedometer drive.
Caution! Locate the reaction peg (arrow) on the speedometer drive in front of the fork slider tube.
Apply a light coating of Molykote paste to the quick-release axle and install it.
Tighten the retaining screw (1).
Compress the front fork firmly several times.
Tighten the clamping screws (2).
Install the brake calipers.
[ABS] Check sensor gap and adjust if necessary.
ABS sensor gap: 0.45...0.55 mm (0.018...0.022 in)
Tightening torque:
- Quick-release axle threaded connection — 30 Nm
- Clamp screws, sliding tube — 22 Nm
- Brake caliper to fork slider tube — 40 Nm