Caution! If the housing or the complete selector shaft is replaced, the selector shaft must be measured and shimmed.
![](https://motoinstruction.ru/img/bmw/6/113969.jpg)
Measure distance «A» from shouldered bushing to cover mating face.
![](https://motoinstruction.ru/img/bmw/6/113970.jpg)
Measure distance «B» from shouldered bushing to housing mating face.
![](https://motoinstruction.ru/img/bmw/6/113971.jpg)
Measure distance «C» from the shoulder on the selector shaft to the back of the sleeve.
Calculate endplay as follows:
A + B = D
D - C = E
E - thickness of spacer = endplay.
Endplay: Selector shaft — 0.1…0.3 mm (0.004...0.012 in)