Place the motorcycle on its centre stand.
Handlebar centred.
Check that the front wheel is on the ground.
Fluid level:
- not below — MIN (halfway up sight glass)
Turn the handlebars to the left.
Check that the front wheel is on the ground.
Required level with a new clutch liner: Half way up sight glass
Note: As the clutch lining wears, the fluid level in the reservoir rises.
Correct the fluid level if necessary. Mark in reservoir: same as brake circuit.
Caution! Do not allow brake fluid to come into contact with painted parts of the motorcycle as brake fluid destroys paint.
Brake fluid grade — DOT 4