Check valve clearance with feeler gauge and, if necessary, correct with adjusting screw.
Valve clearances with engine cold(max. 35°C/95°F):
- Inlet — 0.15 mm (0.006 in)
- Exhaust — 0.30 mm (0.012 in)
Tightening torque: Locknut — 8 Nm
Recheck valve clearances after adjusting. Feeler gauge must pull through between valve stem and adjusting screw with slight resistance.
Assembly is the reverse of the disassembly procedure.
Caution! Make sure that all seals are correctly seated. Seals and sealing faces must be free from oil and grease.
Tightening torque: Cylinder head cover — 8 Nm