Tyres — Marking and Pressures Tiger 800 models are equipped with tubeless tyres, valves and wheel rims. Use only tyres marked 'TUBELESS' and tubeless valves on rims marked 'SUITABLE FOR TUBELESS TYRES'. Typical Tyre Marking - Tubeless Tyre Warning: Do not install tube-type tyres...
Front Wheel — removal and installation Removal Warning: Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it from falling and causing injury to the operator or damage to the motorcycle. 1. Position the motorcycle on a paddock...
Rear Wheel — removal and installation Removal Warning: Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it from falling and causing injury to the operator or damage to the motorcycle. 1. Raise and support the rear of the...
Front Wheel Bearings — removal, installation and inspection Removal 1. Remove the front wheel (see page 15-10 ). Caution: Do not allow the wheel to rest on the brake discs, as this may damage the discs. Support the wheel on wooden blocks, equally spaced around the rim, such that the brake discs are raised...
Rear Wheel Bearings — removal, installation and inspection Removal 1. Remove the rear wheel (see page 15-12 ). Caution: Do not allow the wheel to rest on the brake disc, as this may damage the disc. Support the wheel on wooden blocks, equally spaced around the rim, such that the brake disc is raised above...
Final Drive — removal, installation and inspection Removal Warning: Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it from falling and causing injury to the operator or damage to the motorcycle. 1. Remove the rear wheel (see page 15-12 )....