Starter Motor Clutch Removal/Installation
Refer to the Alternator Rotor Removal/Installation.
Starter Motor Clutch Inspection
Remove:
Alternator Cover (See Alternator Cover Removal) Starter Idle Gear and Torque Limiter (see Alternator Removal)
- Turn the starter motor clutch gear [A] by hand. The starter motor clutch gear should turn clockwise [B] freely, but should not turn counterclockwise [C].
If the starter motor clutch does not operate as it should or if it makes noise, go to the next step.
- Disassemble the starter motor clutch, and visually inspect the clutch parts.
If there is any worn or damaged part, replace it.
Note: Examine the starter motor clutch gear as well. Replace it if it worn or damaged.
Starter Motor Clutch Disassembly
Remove:
- Alternator Rotor (See Alternator Rotor Removal)
- Starter Motor Clutch Bolts [A]
- Remove the starter motor clutch [A].
Starter Motor Clutch Assembly
- Apply a non-permanent locking agent to the threads of the starter motor clutch bolts and tighten them.
Torque - Starter Motor Clutch Bolts: 34 Nm (3.5 kgf·m, 25 ft·lb)