Wheels and tires of motorcycle Kawasaki KLE 650 Versys (2007-2025)

Exploded View of Wheels/Tires
No.FastenerTorqueRemarks Nmkgf·m ft·lb 1Front Axle10811.080 2Front Axle Clamp Bolt202.015 3Rear Axle Nut10811.080 4. Caliper Bracket (KLE650B Models) G: Apply grease. HG: Apply high-temperature grease. R: Replacement Parts WL: Apply soap and water...

Specifications of Wheels/Tires
ItemStandardService Limit Wheels (Rims) Rim Runout: AxialTIR 0.5 mm (0.02 in.) or lessTIR 1.0 mm (0.04 in.) RadialTIR 0.8 mm (0.03 in.) or lessTIR 1.0 mm (0.04 in.) Axle Runout/100 mm (3.94 in.)TIR 0.03 mm (0.0012 in.) or lessTIR 0.2 mm (0.008 in.)...

Special Tools
Bearing Driver Set: 57001-1129 Jack: 57001-1238 Bearing Remover Head, ∅20 x ∅22: 57001-1293 Bearing Remover Shaft, ∅13: 57001-1377 Jack Attachment: 57001-1608

Wheels (Rims)
Front Wheel Removal Remove: Brake Caliper Mounting Bolts [A] (Both Side) Front Brake Calipers [B] Loosen: Axle Clamp Bolt [A] Front Axle [B] Remove the lower fairing (See Lower Fairing Removal in the Frame chapter). Raise the front wheel off the...

Removing and installing Tires
Air Pressure Inspection/Adjustment Refer to the Air Pressure Inspection in the Periodic Maintenance chapter. Tire Inspection Refer to the Wheel/Tire Damage Inspection in the Periodic Maintenance chapter. Tire Removal Remove: Wheel (see Front/Rear...

Hub Bearing — removal and installation
Hub Bearing Removal Remove the wheel (see Front/Rear Wheel Removal), and take out the following. Collars Coupling (Out of Rear Hub) Grease Seals Use the bearing remover to remove the hub bearings [A]. Caution: Do not lay the wheel on the ground with...