Frame and attachments of motorcycle Kawasaki KLE 650 Versys (2007-2025)

Exploded View of Frame
No.FastenerTorqueRemarks Nmkgf·m ft·lb 1Footpeg Holder Bolts343.525L 2Front Footpeg Stay Bolts252.518 3Rear Footpeg Stay Bolts252.518 4Sidestand Bolt444.532 5Sidestand Switch Bolt3.90.4035 in·lbL 6. Canada Model G: Apply grease. L: Apply a...

Seat — removal and installation
Seat Removal Insert the ignition switch key [A] into the seat lock, turning the key clockwise, pulling up on the rear of the seat [B], and pulling the seat backward. Seat Installation Slip the seat hook [A] under the brace [B] on the fuel tank...

Fairings — removal and installation
Lower Fairing Removal Remove the mounting bolts [A] and lower fairing [B]. Lower Fairing Installation Tighten: Torque - Lower Fairing Mounting Bolts: 8.8 Nm (0.90 kgf·m 78 in·lb) Middle Fairing Removal Remove: Windshield (See Windshield Removal)...

Side Covers — removal and installation
Side Cover Removal Remove: Seat (See Seat Removal) Screw [A] Pull the side cover [B] evenly outward to clear the stoppers [C]. Side Cover Installation Installation is the reverse of removal. lnsert the projection [A] into the grommets [B] on the...

Seat Covers — removal and installation
Seat Cover Removal Remove: Seat (See Seat Removal) Screw [A] (Both Sides) Push the central pin, and then remove the quick rivet [B] on both sides. Remove the front seat cover [C] forward. Push the central pin, and then remove the quick rivet [A] on...

Fenders — removal and installation
Front Fender Removal Remove: Brake Hose Clamps [A] Bolts [B] (Both Sides) Remove the front fender [C] upward. Front Fender Installation Installation is the reverse of removal. lnstall the brake hose clamps to the front fender holes. Flap and Rear...

Frame Inspection
Frame Inspection Visually inspect the frame [A] for cracks, dents, bending or warp. If there is any damage to the frame, replace it. Warning: A repaired frame may fail in use, possibly causing an accident. If the frame is bent, dented, cracked, or...

Windshield — removal and installation
Windshield Height Adjustment The windshield can be adjusted within 3 positions in height to suit the rider's preference. Remove the windshield (See Windshield Removal). Move the position of the dampers [A] evenly and adjust the windshield height....

Installing and Removing Sidestand
Sidestand Removal Raise the rear wheel off the ground with stand [A]. Remove: Sidestand Switch Bolt [A] Clamp [B] Sidestand Switch [C] Remove: Spring [A] Sidestand Nut [B] Sidestand Bolt [C] Sidestand [D] Sidestand Installation Apply grease to the...

Frame Cover — removal and installation
Front Frame Cover Removal Remove: Middle Fairings (See Middle Fairing Removal) Bolts [A] Pull the front frame cover [B] outward to clear the stopper [C]. Disconnect the turn signal light lead connector [A]. Front Frame Cover Installation...

Rear View Mirrors — removal and installation
Rear View Mirrors Removal Loosen the lower hexagonal area [A] for tightening to remove the rear view mirror from the holder. Caution: Do not force to tighten and/or loosen the upper hexagonal area (adapter) [B] with a pair of spanners. Disassembly...