- Idle gear shaft
- Idle gear «1»
- Washer
- Idle gear shaft bolt «2»
![](https://motoinstruction.ru/img/yamaha/3/111857.jpg)
Idle gear shaft bolt: 10 Nm (1.0 m·kg, 7.2 ft·lb).
2. Install:
- Generator rotor and starter clutch assembly «1»
![](https://motoinstruction.ru/img/yamaha/3/111858.jpg)
3. Install:
- Generator rotor cover gasket
- Generator rotor cover «1»
Generator rotor cover bolt (M6): 12 Nm (1.2 m·kg, 8.7 ft·lb)
Generator rotor cover bolt (M8): 22 Nm (2.2 m·kg, 16 ft·lb)
![](https://motoinstruction.ru/img/yamaha/3/111859.jpg)
Notes:
- First tighten the M8 bolts and then tighten the M6 bolts.
- Tighten the generator rotor cover bolts in stages and in a crisscross pattern.