Front fork — removal and disassembly Remove the front wheel ( section 5-5 ). Remove the brake hose clamp and brake caliper. Attention! Hang the brake caliper to the frame using a rope, being careful not to twist the brake hose. Remove the fork after the fork mounting bolts in the...
Front fork — troubleshooting Spring Measure the length of the spring in the free position. If the spring is shorter than required, replace the spring with a new one. Spring length limit: 492 mm (19.4 inches) Fork blade and pen body Check the working surface of the pen and the...
Front fork — assembly and installation Assemble and install the fork in the reverse order of removal and disassembly. Please pay attention to the following nuances: Feather inserts, seals Hold the pen vertically and install the anti-friction pen insert by hand. (clean the pen first)....
Suspension adjustment After installing the fork, adjust the compression and rebound force as follows. Tighten the compression and rebound adjustment screws until they stop, then unscrew them to the standard value. Standard adjustment values: Rebound adjustment screw (A)...
Steering wheel — design description 1. Steering wheel holder; 2. Upper crossbar; 3. Steering column nut; 4. Bearing; 5. Bearing; 6. Lower traverse; 7. Steering wheel; A. Handlebar holder bolt; B. Steering column upper nut; C. Upper fork leg bolt; D. Lower fork leg bolt Knot Nm Kgs-m...
Steering wheel — removal and disassembly Remove the front wheel ( section 5-5 ). Remove the plug (chapter 5-9 ). Remove the front fender. Remove the headlight housing ( section 5-2 ). Remove the brake master cylinder, brake caliper and front brake hose. Disconnect the electrical connectors...
Steering wheel — defective Check the removed components for the following faults. If a malfunction is detected, replace with new parts. Wear or decrease in hardness of the working surfaces of the steering column Worn or broken bearings Extraneous noise when the bearing...
Steering wheel — assembly and installation Assemble and install the steering column in the reverse order of removal and disassembly. Please pay attention to the following nuances: Outer bearing races Press in the outer races of the upper and lower bearings using the special tool....