Clutch — inspection and maintenance Drive and driven clutch discs Note. Wipe off the oil from the drive and driven clutch discs with a clean rag. Measure the thickness of all drive discs with a caliper. If the disc thickness is outside the acceptable range, replace the disc with a new...
Shift fork — groove clearance Attention! Make sure that the location and location in the assembled assembly of each removed part is determined. Arrange the parts into groups «Presenters», «Slaves», so that when assembling the unit, install each in its place. Check the gap in the...
Checking transmission bearings Check the play of the bearings installed on the left and right halves of the crankcase. Rotate the inner race by hand to check for smooth operation and absence of extraneous sound. If any defect is found, replace the bearing.
Transmission assembly Assemble the drive and driven shafts in the reverse order of disassembly. Please note the following: Note. Check bushings and washers manually for binding. If any problems are found, replace them. Before installing the gears, apply engine oil to the...