- Place the motorcycle on a level surface and keep the handlebars straight.
- Remove the brake fluid reservoir cap and diaphragm.
- Suck up the old brake fluid as much as possible.
- Fill the reservoir with the new brake fluid.
Specification and Classification: DOT 4
- Connect a clear hose to the caliper air bleeder valve and insert the other end of hose into a receptacle.
- Loosen the air bleeder valve and pump the brake lever until old brake fluid flows out of the bleeder system.
- Close the caliper air bleeder valve and disconnect a clear hose. Fill the reservoir with the new fluid to the upper mark of the reservoir.
Brake air bleeder valve: 7.5 N·m (0.75 kgf·m, 5.5 lb·ft)
Caution:
- Never reuse the brake fluid left over from previous servicing and which has been stored for long periods of time.
- Bleed air from the brake system. (2-25)
