- engine oil (onto the main journal bearings)
- sealant (onto the crankcase mating surfaces)
- Yamaha Bond No. 1215: 90890-85505
2. Tighten: crankcase bolts (follow the proper tightening sequence)
Note: The numbers embossed on the crankcase indicate the crankcase tightening sequence.
- (4)-(6) (M10): 38.5 Nm (3.85 m·kg)
- (1)-(3), (7)-(19) (M6): 10 Nm (1.0 m·kg)
 |  |
Note:
- Lubricate the bolt threads with engine oil.
- Tighten the bolts in increasing numerical order.
| M6 x 30 mm | (1)-(3), (10)-(14), (17)-(19) |
| M6 x 30 mm (Chromium plated bolt) | (15), (16) |
| M6 x 55 mm | (8) |
| M6 x 80 mm | (7), (9) |
| M10 x 60 mm | (5) |
| M10 x 70 mm | (4) |
| M10 x 100 mm | (6) |
(19): with engine ground lead
3. Install: shift shaft stopper plate (1)
Note: Install the shift shaft stopper plate as shown.
