Checklist before use Responsibility for the condition of the vehicle lies with the owner. Important motorcycle parts can begin to fail quickly and unexpectedly, even when the motorcycle is not being used (for example, as a result of exposure to ambient weather...
Warnings when driving a motorcycle Become familiar with all controls and their functions before riding your motorcycle. Consult your Yamaha dealer if you do not understand the functions of any of the controls. Never start the engine or let it run in enclosed spaces, even for a short...
Engine starting For the ignition interlock system to allow starting, one of the following conditions must be met: The gearbox is in neutral. The gear is engaged with the clutch lever depressed and the side stand raised. Warning! Before starting the engine, check...
Gear shift Shifting gears allows you to control the amount of engine power needed for starting, accelerating, driving up hills, etc. The gear positions are shown in the figure. 1. Gear switch pedal; N. Neutral 1. Gear switch pedal; N. Neutral Note. To shift...
Tips for reducing fuel consumption Fuel consumption largely depends on your driving style. Consider the tips below to reduce fuel consumption: Warm up the engine well. Turn off the starter (open the air damper) As soon as possible. Upshift quickly and avoid high engine speeds when...
Running in the engine There is no more important period in the life of your engine than the period between 0 and 1600 km. Therefore, please read the instructions below carefully. Since the engine is completely new, do not apply excessive loads during the first 1600...
Motorcycle parking With the motorcycle parked, stop the engine, remove the key from the main switch and turn the fuel cock lever to the "OFF" position. Warning! Because the engine and exhaust system can be very hot, leave the motorcycle in a place where it cannot be...