Disassembling rear brake caliper (Yamaha FZ1)

0

1. Remove:

• Brake caliper piston «1»
• Brake caliper piston seals «2»
• Brake caliper piston dust seals «3»

a. Secure the brake caliper pistons with a piece of wood «a».

b. Blow compressed air into the brake hose joint opening «b» to force out the piston from the brake caliper.

Warnings!

• Cover the brake caliper piston with a rag. Be careful not to get injured when the piston is expelled from the brake caliper.
• Never try to pry out the brake caliper piston.

c. Remove the brake caliper piston seals.

See this article in russian language

Article about repair motorcycles «Yamaha Fazer FZ1» (2006-2015): «Disassembling rear brake caliper»: https://motoinstruction.ru/en/Yamaha/Fazer/FZ1/chassis/brake/110931 <a href="https://motoinstruction.ru/en/Yamaha/Fazer/FZ1/chassis/brake/110931">Disassembling rear brake caliper</a> - article about repair motorcycles «Yamaha Fazer FZ1» (2006-2015) from section «Brake system». [url=https://motoinstruction.ru/en/Yamaha/Fazer/FZ1/chassis/brake/110931]Disassembling rear brake caliper[/url] - article about repair motorcycles «Yamaha Fazer FZ1» (2006-2015) from section «Brake system».