| Order | Job/Parts to remove | Quantity | Remarks |
| Front wheel | Refer to «Front wheel». | ||
| Front brake calipers | Refer to «Front brake». | ||
| Front cowling (FZ1-S(X)/FZ1-SA) | Refer to «General chassis». | ||
| Headlight and meter assembly (FZ1-N(X)), (FZ1-NA) | Refer to «General chassis». | ||
| Handlebar | Refer to «Handlebar». | ||
| Front fork legs | Refer to «Front fork». | ||
| 1 | Main switch connector | 2 | Disconnect. |
| 2 | Steering stem nut | 1 | |
| 3 | Upper bracket | 1 | |
| 4 | Front brake hose joint | 1 | |
| 5 | Front brake hose joint bracket | 1 | |
| 6 | Horn | 1 | |
| 7 | Horn bracket | 1 | |
| 8 | Lock washer | 1 | |
| 9 | Upper ring nut | 1 | |
| 10 | Rubber washer | 1 | |
| 11 | Lower ring nut | 1 | |
| 12 | Lower bracket | 1 | |
| 13 | Lower bearing | 1 | |
| 14 | Lower bearing dust seal | 1 | |
| 15 | Lower bearing inner race | 1 | |
| 16 | Bearing cover | 1 | |
| 17 | Upper bearing inner race | 1 | |
| 18 | Upper bearing | 1 | |
| 19 | Bearing outer race | 2 |
1. Stand the vehicle on a level surface.
Warning! Securely support the vehicle so that there is no danger of it falling over.
2. Remove:
- Upper ring nut «1»
- Rubber washer
- Lower ring nut «2»
- Lower bracket
Note: Hold the lower ring nut with the ring nut wrench «3», and then remove the upper ring nut with the steering nut wrench «4».
Ring nut wrench: 90890-01268.
Spanner wrench: YU-01268.
Steering nut wrench: 90890-01403.
Spanner wrench: YU-33975.
Warning! Securely support the lower bracket so that there is no danger of it falling.
