- Main axle runout (with a centering device and dial gauge «1»)
Out of specification → Replace the main axle.
Main axle runout limit: 0.08 mm (0.0032 in)
2. Measure:
- Drive axle runout (with a centering device and dial gauge «1»)
Out of specification → Replace the drive axle.
Drive axle runout limit: 0.08 mm (0.0032 in)
3. Check:
- Transmission gears. Blue discoloration/pitting/wear → Replace the defective gear(s).
- Transmission gear dogs. Cracks/damage/rounded edges → Replace the defective gear(s).
