- Washer
- Stopper lever «1»
- Stopper screw «2»
Stopper screw: 22 Nm (2.2 m·kg, 16 ft·lb)
- Stopper lever spring «3
![](https://motoinstruction.ru/img/yamaha/3/111922.jpg)
2. Install:
- Washer
- Collar
- Shift shaft spring «1»
- Shift shaft «2»
Notes:
- Mesh the stopper lever with the shift drum segment assembly.
- Lubricate the oil seal lips with lithium soap base grease.
- Install the end of the shift shaft spring onto the shift shaft spring stopper.
![](https://motoinstruction.ru/img/yamaha/3/111923.jpg)
3. Install:
- Washer «1»
- Circlip «2»
![](https://motoinstruction.ru/img/yamaha/3/111924.jpg)
4. Install:
- Shift rod
- Shift arm
Refer to «Engine removal».
5. Install:
- Clutch assembly
Refer to «Clutch».