- Rider footrest (right and left) EWA14B1018
Warning: When removing the right rider footrest "1", be careful not to burn with the exhaust chamber "2".
2. Adjust:
- Rider footrest position (right and left)
a. Remove the rider footrest bolts.
b. When adjusting the right rider footrest, change the position of the hole "a" of the exhaust chamber cover "1" and then install it to the right rider footrest "2".
Exhaust chamber cover bolt: 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
c. Adjusting the right rider footrest "1".
d. Adjusting the left rider footrest "1".
Notice: Route the rear brake light switch lead through the groove "1" of the right rider footrest and groove "2" of the exhaust chamber cover.
When adjusting the left and right rider footrest, be sure to set them on the same level.
e. Install the rider footrest bolts.
Rider footrest bolt: 28 Nm (2.8 m·kgf, 20 ft·lbf)
- Install the end "a" of the exhaust chamber cover "1" within the range "b" of the exhaust chamber upper cover "2" as shown in the illustration.
- After adjusting the right rider footrest, adjust the rear brake pedal and rear brake light switch.
Refer to "Adjusting the rear disc brake".
Refer to "Adjusting the rear brake light switch".
