Installing the air induction system (Yamaha YZF-R1 Y(C))

0

1. Install:

• Reed valves
• Reed valve stoppers
• Reed valve base

2. Install:

• Reed valve plate

Align the projection "a" on the cylinder head cover "1" with the hole "b" in the reed valve plate.

• Reed valve assembly

Install the reed valve assembly so that the open side turns to the exhaust side of the engine.



3. Install:

• Reed valve cover

Reed valve cover bolt 10 Nm (1.0 m·kgf, 7.2 ft·lbf).

See this article in russian language

Article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014): «Installing the air induction system»: https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/fuel/115580 <a href="https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/fuel/115580">Installing the air induction system</a> - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Fuel system». [url=https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/fuel/115580]Installing the air induction system[/url] - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Fuel system».