Removing
To remove the radiator, you must remove the motorcycle seat (see «Seat - removal and installation») and fuel tank (see «Fuel tank - removal and installation») and drain the coolant (see «Coolant - replacement»).
1. Turn off the clamp of the upper radiator hose.

2. Remove the top hose from the radiator pipe.

3. Turn off the clamp of the lower radiator hose.

4. Remove the lower hose from the radiator pipe and remove it from the ring.

5. Disconnect the fan switch connector and the fan connector.

6. Using an 8 mm wrench, unscrew the two bolts securing the radiator to the motorcycle frame.

7. We take the upper part of the radiator forward and lift it up, removing it from the lower fixing pin.

8. Remove the radiator.

Installation
Installation is carried out in the reverse order.