Removing and installing right-hand silencer
Remove number plate.
Remove the fastener (arrow) securing the silencer to the rear frame.
Separate the right-hand silencer with balance pipe from the left-hand silencer and at the same time lift it clear of bracket (1).
If necessary, remove fasteners (2) and remove silencer guard (3).
Installation is the reverse of the removal procedure.
Removing and installing left-hand silencer
Remove right-hand silencer.
Remove the fastener securing the silencer to the rear frame.
Loosen clamp (6) for silencer.
Separate the left-hand silencer with connecting pipe from the exhaust manifold and at the same time lift it clear of bracket (7).
If applicable, remove silencer guard (4) and guard (5) for catalytic converter.
Installation is the reverse of the removal procedure, pay particular attention to the following.
Make sure that the installed position (arrow) of the clamp for silencer (8) is correct.
Tightening torques:
- Guard to silencer: 9 Nm
- Clamp for silencer: 55 Nm
- Silencer to rear frame: 21 Nm