- Cylinder stud bolts "1"
Cylinder stud bolt 8 Nm (0.8 m·kgf, 5.8 ft·lbf).
Retighten the cylinder stud bolts to specification, before installing the cylinder head.
2. Install:
- Cylinder head gasket "2"
- Dowel pins
3. Install:
- Cylinder head
- Washers New
- Cylinder head nuts
- Cylinder head bolts
- Pass the timing chain through the timing chain cavity.
- Lubricate the cylinder head nuts and washers with engine oil.
4. Tighten:
- Cylinder head nuts "1"-"10"
- Cylinder head bolts "11", "12"
Cylinder head nut:
- 1st: 10 Nm (1.0 m·kgf, 7.2 ft·lbf).
- 2nd: 25 Nm (2.5 m·kgf, 18 ft·lbf).
- 3rd: Bolt "1"-"7", "10" + 115 - 125°. Bolt "8", "9" + 130 - 140°
Cylinder head bolt 12 Nm (1.2 m·kgf, 8.7 ft·lbf).
Tighten the cylinder head nuts in the tightening sequence as shown and torque them in 3 stages.
5. Install:
- Exhaust camshaft
- Intake camshaft
Refer to "Installing the camshafts".