Installing the cylinder head (Aprilia Shiver 750)

0

Place the fixed chain tensioner slider on the cylinder timing chain compartment, opposite to the chain tensioner.



Fit a new gasket between the cylinder and the head.

Couple the cylinder and the head.



Screw without tightening the two screws on the outlet side.



Screw without tightening the screw on the intake side.

Tighten the cylinder-head fixing screws to the prescribed torque.

Place the cylinder-head unit on the crankcase stud bolts.

See this article in russian language

Article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016): «Installing the cylinder head»: https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/repair/114614 <a href="https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/repair/114614">Installing the cylinder head</a> - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Engine repair». [url=https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/repair/114614]Installing the cylinder head[/url] - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Engine repair».