Rear suspension of motorcycle Aprilia Shiver 750 (2007-2016)
- Main
- Aprilia
- Shiver
- SL 750
- Running gear and frame
- Rear suspension
See this section in russian language
Removing the rear wheel
Place the vehicle on its rear service stand. In order to work faster, remove the chain cover. Fully slacken the gearing chain tension. Make the wheel move forward and release the gearing chain from the sprocket. Unscrew and remove the nut on the...
Place the vehicle on its rear service stand. In order to work faster, remove the chain cover. Fully slacken the gearing chain tension. Make the wheel move forward and release the gearing chain from the sprocket. Unscrew and remove the nut on the...
Checking the rear wheel
Caution! Check that all parts are in good condition, especially those listed as follows. Rear wheel bearings Carry out the check with the bearings fitted on the wheel. Rotation check Manually rotate the inside ring of each bearing. Rotation must be...
Caution! Check that all parts are in good condition, especially those listed as follows. Rear wheel bearings Carry out the check with the bearings fitted on the wheel. Rotation check Manually rotate the inside ring of each bearing. Rotation must be...
Removing rear shock absorbers
Place the optional under-sump and rear wheel service stands. Unscrew and remove the upper screw and collect the washer. Loosen the under-sump optional service stand to lower the engine. Undo and remove the lower screw and collect the nut. Remove the...
Place the optional under-sump and rear wheel service stands. Unscrew and remove the upper screw and collect the washer. Loosen the under-sump optional service stand to lower the engine. Undo and remove the lower screw and collect the nut. Remove the...
Removing rear swinging arm
Remove the rear wheel. Support the vehicle by means of the engine service stand and a hoist with belts fastened to the rear section of the frame. Remove the rear service stand. Undo and remove the two lower swingarm screws. Remove the cable guide....
Remove the rear wheel. Support the vehicle by means of the engine service stand and a hoist with belts fastened to the rear section of the frame. Remove the rear service stand. Undo and remove the two lower swingarm screws. Remove the cable guide....
- Information for owner
- Introduction to manual
- Control devices
- Operation manual
- Technical characteristics
- Maintenance
- Engine and systems
- Engine repair
- Lubrication system
- Cooling system
- Fuel system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Electric equipment
- Equipment and devices