Instruments and controls of motorcycle Aprilia Shiver 750 (2007-2016)

Location of main components
1. Left side fairing 2. Left front turn signal 3. Clutch fluid reservoir 4. Left rear view mirror 5. Battery 6. Glove box/tool kit 7. Main fuses 8. Auxiliary fuses 9. ABS fuses 10. Seat 11. Tail light 12. Left rear turn signal 13. Glove box/tool kit...

Dashboard
Dashboard/Controls Layout: 1. Clutch control handle 2. Ignition switch/steering column lock 3. Dashboard 4. Front brake handle 5. Throttle handle 6. High beam flasher switch 7. MODE switch 8. Turn signal switch 9. Horn button 10.Hazard alarm 11....

Light indicators
Designations: 1. High beam warning lamp, blue 2. Left turn signal indicator, green 3. General warning lamp, red 4. Neutral gear warning lamp, green 5. Side support lowered warning lamp, amber yellow 6. ABS warning lamp, red 7. Right turn signal...

Digital LCD display
When the ignition key is turned to position «KEY ON» The following indicators light up on the instrument panel for 2 seconds: logo «SHIVER»; all warning lamps. The tachometer needle moves up and then returns to its original position. The general...

Emergency signals
In the event of a malfunction, different icons are displayed at the bottom of the display depending on the cause. Contact your authorized Aprilia dealer as soon as possible. An alarm about the need for maintenance If a fault is detected in the...

Selecting a control program
The engine control unit has 3 different options «programs» to control the electronic throttle, which are displayed in the upper left corner of the digital instrument panel display: T stands for TOURING program (Tourism) S stands for SPORT program...

Control buttons
Mileage log 1 and 2 There are two mileage logs. To select MILEAGE LOG 1, press and hold the MODE button left; icon appears on the DIGITAL DISPLAY «1». To select MILEAGE LOG 2, press and hold the MODE button to the right; icon appears on the DIGITAL...

Additional functions
Menu MENU The configuration menu opens on the menu screen and contains the following options: EXIT (Exit) SETTINGS (Settings) CHRONOMETER (Chronometer) DIAGNOSIS (Diagnostics) LANGUAGES (Languages) Settings (Settings) The SETTINGS menu contains the...

Egnition lock
Egnition lock (1) located in front of the fuel tank. The vehicle comes with two keys (one key - spare). If the ignition switch is set to «OFF», lights are turned off. Note. The key is for the ignition switch and steering column lock. Note: When the...

The beep button
Press to turn on the sound signal.

Turn signal switch
Move the switch to the left to show left turn; move the switch to the right to show a right turn. When the switch is pressed, the turn signal is turned off. Attention! If the indicator lamp with arrows flashes rapidly, this means that one or both...

Button overtaking
Used to flash the high beams in case of danger or emergency. When this switch is released, the high beams turn off.

Emergency button
If you press this button while the ignition switch is in the «ON», the four direction indicators and their indicator lamps on the instrument panel turn on simultaneously. The hazard warning lights remain on even after the key is removed, but cannot...

Start button
When this button is pressed, the starter starts to rotate the engine. Attention! 5 seconds after the engine starts, this button can be used as a button «program selection».

Engine switch
Serves as an engine shutdown or emergency stop button. Press this switch to stop the engine.

Anti-lock braking system (ABS)
The ABS system prevents wheel locking in the event of emergency braking, increasing vehicle stability compared to a traditional braking system. ABS improves vehicle handling by taking into account the physical limitations on the vehicle's grip on...

Using the immobilizer
To increase security against theft, this vehicle is equipped with an electronic immobilizer, which automatically turns on when the key is removed from the ignition. Keep the second key in a safe place, as if it is lost it will be impossible to make...

Seat opening
Place the vehicle on its support. Insert the key (1) to the castle. Turn the key (1) counterclockwise, move the seat (2) and remove it. The rear of the vehicle has a useful glove box/tool compartment. To access it, remove the seat (2). To lock the...

Motorcycle identification numbers
Record the chassis and engine numbers in the space provided in this manual. The chassis number should be known when purchasing spare parts. Attention! Changing identification numbers is a crime that can result in severe criminal penalties and fines....