Drive Chain For safety and to prevent excessive wear, the drive chain must be checked, adjusted and lubricated in accordance with scheduled maintenance requirements. Checking, adjustment and lubrication must be carried out more frequently for extreme conditions...
Chain Adjustment Chain Free-movement Inspection 1. Maximum movement position Warning: Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help prevent it from falling and causing injury to the operator or damage to the...
Rear Suspension Unit — removal, installation and inspection Removal Warning: If the engine has recently been running, the exhaust system will be hot. Before working on or near the exhaust system, allow sufficient time for the exhaust system to cool as touching any part of a hot exhaust system could cause...
Drag Link and Drop Links — removal, installation and inspection Removal Warning: If the engine has recently been running, the exhaust system will be hot. Before working on or near the exhaust system, allow sufficient time for the exhaust system to cool as touching any part of a hot exhaust system could cause...
Swinging Arm — removal, disassembly, inspection and assembly Removal Warning: If the engine has recently been running, the exhaust system will be hot. Before working on or near the exhaust system, allow sufficient time for the exhaust system to cool as touching any part of a hot exhaust system could cause...
Drive Chain Replacement Rivet link type The following instructions for the replacement of rivet link type drive chains requires the use of service tool T3880027. Warning: Before starting work, ensure the motorcycle is stabilised and adequately supported. This will help...