Removing the rear wheel (Aprilia Shiver 750)
- Main
- Aprilia
- Shiver
- SL 750
- Running gear and frame
- Rear suspension
- Removing the rear wheel
Place the vehicle on its rear service stand.
In order to work faster, remove the chain cover.
Fully slacken the gearing chain tension.
Make the wheel move forward and release the gearing chain from the sprocket.
Unscrew and remove the nut on the wheel axle.
Collect the thrust washer and the right chain tensioner slider.
Working on the right side, hit the wheel axle lightly so as to take out the head from its housing.
Working on the left side, slide off the wheel axle together with the chain guide slider.
Remove the wheel by freeing the disc from the brake calliper.
Collect the spacer from the rear wheel right side.
Working from the left side, unscrew and remove the five nuts and remove the sprocket and the bolts.
Undo and remove the five screws and remove the anti-vibration buffer holder.
Check the flexible couplings according to the routine maintenance table.
See also specifications for this operation.
In order to work faster, remove the chain cover.
Fully slacken the gearing chain tension.
Make the wheel move forward and release the gearing chain from the sprocket.
Unscrew and remove the nut on the wheel axle.
Collect the thrust washer and the right chain tensioner slider.
Working on the right side, hit the wheel axle lightly so as to take out the head from its housing.
Working on the left side, slide off the wheel axle together with the chain guide slider.
Remove the wheel by freeing the disc from the brake calliper.
Collect the spacer from the rear wheel right side.
Working from the left side, unscrew and remove the five nuts and remove the sprocket and the bolts.
Undo and remove the five screws and remove the anti-vibration buffer holder.
Check the flexible couplings according to the routine maintenance table.
See also specifications for this operation.
See this article in russian language
This article has been reviewed: Serafim Sazonov
Similar articles about motorcycles of other brands
Removing the rear wheel (FZ1-N(X)/FZ1-S(X)) Yamaha FZ1 Fazer (2006-2015)Removing and installing taper roller bearing in rear wheel… BMW R 1150 GS (1999-2004)
Removing and installing the rear wheel Honda VTX 1800 C (2001-2008)
Removing the rear wheel Ducati ST2 (1997-2003)
Exploded view — rear wheel and cush drive Triumph Rocket III (2004-2018)
Link to this article in different formats
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Control devices
- Operation manual
- Technical characteristics
- Maintenance
- Engine and systems
- Engine repair
- Lubrication system
- Cooling system
- Fuel system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Electric equipment
- Equipment and devices