Installing oil pump (BMW R1150GS)

0

Caution! Oil the friction faces.

Install outer rotor (1) of oil pump in pump housing.

Install oil pump housing with cooling oil pipe (2).

Caution: O-ring (3) must be in perfect condition.

The original is available on the website [MotoInstruction.ru]

Install Woodruff key (4), outer rotor (5) and inner rotor (6) in cooling oil pump.

Secure housing cover (7) to oil pump.

Caution! Note different lengths of screws.

Tightening torque:

• M6 screw — 9 Nm
• Pressure relief valve — 42 Nm
• Oil pressure switch — 30 Nm

See this article in russian language

Removing and installing water pump Kawasaki Versys 650 (2007-2025)
Installing the oil/water pump assembly Yamaha FZ1 Fazer (2006-2015)
Old generation oil pump installing Aprilia SL 750 Shiver (2007-2016)
Exploded view — fuel pump Triumph Rocket III (2004-2018)
Installing the side stand spring Suzuki DRZ 250 (1996-2007)

Article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004): «Installing oil pump»: https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111639 <a href="https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111639">Installing oil pump</a> - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Engine repair». [url=https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111639]Installing oil pump[/url] - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Engine repair».