Installing radial shaft seals on crankshaft (BMW R1150GS)

0

Installing the crankshaft-end radial shaft seal

Shape the lip of the radial shaft seal carefully by hand (1).

Oil the radial shaft seal at the sealing/contact surface.

Using assembly sleeve, BMW No. 11 5 702, mount the radial shaft seal with the closed side toward the clutch onto sleeve, BMW No. 11 5 703, (2).

Remove assembly sleeve (3).

Mount sleeve complete with radial shaft seal on crankshaft (4).

Use drift, BMW No. 11 5 701, together with sleeve (5) to drive the radial shaft seal onto the crankshaft.

Remove sleeve (6).

Installing the clutch-end radial shaft seal

Shape the lip of the radial shaft seal carefully by hand (7).

Oil the radial shaft seal at the sealing/contact surface.

Using assembly sleeve, BMW No. 11 5 662, mount the radial shaft seal with the closed side toward the clutch onto drift,BMW No. 11 5 661, with handle, BMW No. 005500, (8).

Remove assembly sleeve (9).

Using the drift, drive the radial shaft seal home (10).

See this article in russian language

Article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004): «Installing radial shaft seals on crankshaft»: https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111637 <a href="https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111637">Installing radial shaft seals on crankshaft</a> - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Engine repair». [url=https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111637]Installing radial shaft seals on crankshaft[/url] - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Engine repair».