
Caution! Oil the bearings.
Installing timing chain tensioning and slide rails
Seal pivot pin for tensioner rail/slide rail at clutch side (arrow) with 3-Bond 1209.
Insert pivot screw (1) into chain tensioner rail, using a new seal.
Tightening torque: Chain guide rail pivot pin — 18 Nm
Installing auxiliary shaft/timing chains
When installing the auxiliary shaft, make sure that the bore in the auxiliary shaft (2) facing the crankshaft is in line with the crankcase mating face.
Caution! Timing chains (3) must mesh fully with auxiliary shaft sprockets.