Installing clutch housing (BMW R1150GS)

0

Caution! Always use new screws for housing and cover.

Install clutch housing with mark (1) aligned with crankshaft mark (2).

Install locking device, BMW No. 11 5 640, to lock clutch housing.

Insert all screws by hand and tighten.

Tightening torque:

• Clutch housing to crankshaft (screw threads oiled) — 40 Nm
• Tightening angle — 32°

See this article in russian language

Article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004): «Installing clutch housing»: https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111638 <a href="https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111638">Installing clutch housing</a> - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Engine repair». [url=https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111638]Installing clutch housing[/url] - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Engine repair».