Old generation oil pump installing (Aprilia Shiver 750)

0

Note.

• Pay attention to align the references on stator and rotor during installation and check clearance with a feeler gauge.
• If required, replace the stator / rotor unit.

Fit the oil pump in its seat.



Tighten both oil pump fixing screws.



Fit the shim washer.



Fit the oil pump gear and fasten it through appropriate screw with corresponding washer.


[The original publication was found on the resource: motoinstruction.ru]



By means of a commercial hook spanner, lock the pump and tighten the screw to the prescribed torque.



See also specifications for this operation.

See this article in russian language

Removing and installing water pump Kawasaki Versys 650 (2007-2025)
Installing the oil/water pump assembly Yamaha FZ1 Fazer (2006-2015)
Installing oil pump BMW R 1150 GS (1999-2004)
Exploded view — fuel pump Triumph Rocket III (2004-2018)
Installing the side stand spring Suzuki DRZ 250 (1996-2007)

Article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016): «Old generation oil pump installing»: https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/lube/114626 <a href="https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/lube/114626">Old generation oil pump installing</a> - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Lubrication system». [url=https://motoinstruction.ru/en/Aprilia/Shiver/SL750/engine/lube/114626]Old generation oil pump installing[/url] - article about repair motorcycles «Aprilia Shiver SL 750» (2007-2016) from section «Lubrication system».