Removing and installing oil thermostat (BMW R1150GS)

0

Remove screws securing oil cooler line to fairing bracket.

Disconnect oil cooler line from crankcase.

Remove support plate (1), control element (2) and spring (3).

Installation is the reverse of the removal procedure.

Tightening torque: M 6 screw — 9 Nm

See this article in russian language

Article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004): «Removing and installing oil thermostat»: https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111630 <a href="https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111630">Removing and installing oil thermostat</a> - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Engine repair». [url=https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111630]Removing and installing oil thermostat[/url] - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Engine repair».