General advice on repair work (Ducati ST2)

0

During repair work always renew gaskets, seals and split pins.

When loosening or tightening nuts and bolts, always start with the largest and always start from the centre. Tighten nuts and bolts working diagonally; tighten to the specified torque wrench settings.

At disassembly, mark any parts and positions which might easily be confused at reassembly.

Only use Ducati original spare parts. Only use the recommended lubricants.

Use special service tools and fixtures . where specified.

Ducati Technical Bulletins often contain up-dated versions of the service procedures in this manual. Check the latest Bulletin for details.

See this article in russian language

Major engine repair — general note Honda Africa Twin 750 (1989-2003)
Coolant — general information Triumph Rocket III (2004-2018)
General specifications Yamaha FZ1 Fazer (2006-2015)
General precautions Suzuki DRZ 250 (1996-2007)
General specifications Kawasaki ZX6R/ZX600J (2000-2002)

Article about repair motorcycles «Ducati ST series ST2» (1997-2003): «General advice on repair work»: https://motoinstruction.ru/en/Ducati/ST/ST2/owner/spec/112024 <a href="https://motoinstruction.ru/en/Ducati/ST/ST2/owner/spec/112024">General advice on repair work</a> - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Technical characteristics». [url=https://motoinstruction.ru/en/Ducati/ST/ST2/owner/spec/112024]General advice on repair work[/url] - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Technical characteristics».