General tightening torque settings (Aprilia RS125/3)

0

The table shows the standard tightening torque settings for ISO thread screws and bolts.

Screw or bolt thread	Wrench	Tightening torque
		Nm	kgm
M 6	10	6	0.6
M 8	12	15	1.5
M 10	14	30	3.0
M 12	17	55	5.5
M 14	19	85	8.5
M 16	22	130	13.0

For special couplings on this vehicle, refer to 2.3.4.

If not otherwise specified, the tightening torque settings refer to clean, dry and ambient temperature threads.

Note. In order to avoid any possible deformation and/or wrong coupling, please tighten screws and bolts as follows:

• Snug all fasteners by hand.
• Apply half of the recommended tightening torque value and tighten the opposite parts: (A) and (B); (C) and (D).
• Repeat the above operation by tightening to the specified torque value.

Note. The pressure on the fastening parts will be thus evenly distributed on the coupling surface.

See this article in russian language

General tightening torque specifications Yamaha FZ1 Fazer (2006-2015)
Torque wrench settings Triumph Rocket III (2004-2018)
Torque settings Ducati Monster 696 (2007-2014)
Tightening torque Suzuki DRZ 250 (1996-2007)
General diagram of the power supply system Honda CB 400 SF (1992-1999)

Article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005): «General tightening torque settings»: https://motoinstruction.ru/en/Aprilia/RS/RS125-3/owner/intro/112745 <a href="https://motoinstruction.ru/en/Aprilia/RS/RS125-3/owner/intro/112745">General tightening torque settings</a> - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Introduction to manual». [url=https://motoinstruction.ru/en/Aprilia/RS/RS125-3/owner/intro/112745]General tightening torque settings[/url] - article about repair motorcycles «Aprilia RS-series RS 125» (1998-2005) from section «Introduction to manual».