Axle
Place the axle in V-blocks and measure the runout.
Actual runout is 1/2 the total indicator reading.
Service limit: 0.2 mm (0.01 in).
Wheel
Check the rim runout by placing the wheel in a truing stand.
Spin the wheel slowly and read the runout using a dial indicator.
Actual runout is 1/2 the total indicator reading.
Service limit:
- Radial: 2.0 mm (0.08 in)
- Axial: 2.0 mm (0.08 in)
Wheel bearing
Turn the inner race of each bearing with your finger.
The bearings should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in the hub.
Remove and discard the bearings if the races do not turn smoothly, quietly, or if they fit loosely in the hub.
Replace the wheel bearing in pairs.