Remove the brake disc bolts and rear brake disc.
Remove the О-ring from the final driven flange.
Remove the final driven flange nuts and final driven flange A.
Remove the О-ring from the left wheel hub.
Remove the snap ring from the left wheel hub.
Remove final driven flange В from the left wheel hub.
Remove the rear wheel rubber dampers.
Install the bearing remover head into the bearing.
From the opposite side of wheel, install the bearing remover shaft and drive the bearing out of the wheel hub.
Remove the distance collar and drive out the other bearing.
Tools:
- Bearing remover shaft 07GGD-0010100
- Bearing remover head, 20 mm 07746-0050600
Final driven flange disassembly/assembly
Drive out rear axle distance collar A from final driven flange A.
Drive out the final driven flange bearing (6905 RS) from final driven flange A.
Drive in the final driven flange bearing (6905 RS) to final driven flange A until it is fully seated.
Tools:
- Driver 07749-0010000
- Attachment, 42x47 mm 07746-0010300
- Pilot, 20 mm 07746-0040500
Drive in rear axle distance collar A to final driven flange A.
Tools:
- Driver 07749-0010000
- Attachment, 24x26 mm 07746-0010700
- Pilot, 20 mm 07746-0040500