Instruments and indicators Indicators and signaling devices are located on the fuel tank. Their purpose is outlined in the tables on the following pages. (1) Speedometer (2) Odometer/trip display (3) Fuel level indicator (4) Neutral indicator (5) Low oil pressure indicator...
Odometer and trip odometer display Display (1) has two functions: odometer and trip mileage indicator. Click the button (2) to select "Odometer" modes ("ODO") or "Trip mileage indicator" ("TRIP"). To reset the trip mileage indicator, you must be in the "Trip mileage indicator" mode...
Egnition lock Egnition lock (1) located at the front of the left side panel. (1) Egnition lock Ignition key positionsPurposeRemoving the KeyOFF position (OFF)The engine and lights cannot be turned on.In this position the key can be removed from the ignition...
Right Handle Controls Engine switch Engine switch (1) located next to the throttle control handle. When the switch is in the "" position RUN (JOB), the engine can run. When the switch is in the "" OFF position (OFF), the engine cannot run. This switch is primarily a...
Left Handle Controls Switch for low and high beam headlights (1) Press the "Hi" side of the switch key to turn on the high beam or the "LO" side to turn on the low beam. Turn signal switch (2) Move the switch to the left, to the "L" position, to turn on the left turn...
Motorcycle steering lock Steering lock (1) located on the steering column. (1) Lock steering wheel To lock the steering wheel, turn the steering wheel all the way to the left, insert the ignition key into the ignition switch and turn the key in the lock counterclockwise...
Helmet holder Helmet holder (1) located on the left side of the motorcycle under the seat. The helmet holder is designed to secure the helmet while parked. Insert the ignition key (2) and turn it counterclockwise to unlock. Hang your helmet on your finger (3)...
Document compartment Document compartment (1) located behind the left side panel. Remove the left side panel (see here). Open the lid (2) compartments for documents, insert the ignition key (3) into the lock and turn it counterclockwise to unlock the compartment. This...
Motorcycle side panel To remove the right side panel (1) and left sidebar (2) pull them to the side. (1) Right sidebar (2) Left sidebar
Removing and installing the seat To service the battery, the seat must be removed. Removing the seat 1. Remove the seat mounting screws (1), remove the nut (2) and a puck (3). 2. Slide the seat (4) back and up. Seat installation 1. Insert the tongue (5) seats in frame hinge. 2....
Adjusting the headlight direction vertically Vertical adjustment is achieved by turning a screw in or out (1), depending on the direction in which the adjustment is made. Observe local traffic regulations. (1) Screw; (A) Move up; (IN) Move down
Motorcycle Specifications Dimensions Total length - 2455 mm. Total width - 940 mm. Total height - 1130 mm. Wheelbase - 1715 mm. Weight Dry weight - 327 kg (721 pounds) Refill containers Engine oil: After draining - 3.5 liters. After draining the oil and replacing the oil...