Both bearings, outer races and grease retainer must be replaced as a set if any part is damaged or worn.
Pivot bearing outer race replacement
Punch or drill an appropriate hole into one grease retainer plate.
Remove the outer race on the other side with the grease retainer plate.
Remove the outer race with the grease retainer plate.
Tools:
- Left bearing:
- Pilot, 30 mm 07746-0040700
- Driver handle 07749-0010000
- Right bearing:
- Driver 07949-3710001
- Pilot, 30 mm 07746-0040700
Install new grease retainer plates and drive new bearing outer races into the swingarm pivots.
Tools:
- Driver 07749-0010000
- Attachment, 37x40 mm 07746-0010200