![](https://motoinstruction.ru/img/honda/9/116370.jpg)
Apply 5 g (0.18 oz) of molybdenum disulfide paste to the joint surface of the final gear case splines and driven flange.
Engage the rear wheel with the final gear case, making sure the splines are correctly aligned.
![](https://motoinstruction.ru/img/honda/9/116371.jpg)
Install the rear brake caliper onto the brake disc.
![](https://motoinstruction.ru/img/honda/9/116372.jpg)
Insert the rear axle through the swingarm, rear brake caliper bracket, collar, hub and final gear case (from the left side).
![](https://motoinstruction.ru/img/honda/9/116373.jpg)
Install and tighten new rear caliper stopper pin bolt to the specified torque.
Torque: 69 N·m (7.0 kgf·m, 51 lbf·ft).
![](https://motoinstruction.ru/img/honda/9/116374.jpg)
Install and tighten the rear axle nut to the specified torque.
Torque: 110 N·m (11.2 kgf·m, 81 lbf·ft).
Operate the brake pedal several times.
If the final gear case was removed, tighten the gear case mounting nuts to the specified torque.
Torque: 64 N·m (6.5 kgf·m, 47lbf·ft).
Install the license plate bracket and tighten the bolts securely.
Install the exhaust system (page 2-5).
![](https://motoinstruction.ru/img/honda/9/116375.jpg)