For the Europe Models, remove the axle caps.
Loosen:
- Front Axle Clamp Bolt [A]
- Front Axle [B]
Remove:
- Front Fender (see Front fender removal in the Frame chapter)
Using the jack [A] under the frame pipe, and a commercially available jack [B] under the engine [C], lift the front wheel [D] OFF the ground until the rear wheel [E] touches the ground.
- Special Tool - Jack: 57001-1238
Caution! Be sure to put the rear wheel ON the ground when removing the front wheel, or the motorcycle may fall over. The motorcycle could be damaged.
Be sure to put the rear wheel ON the ground when removing the front wheel, or the motorcycle may fall over. It could cause an accident and injury.
Pull out the axle to the right, and remove the front wheel and collars [A].
Caution! Do not lay the wheel directly on the ground with the disc facing down. This can damage or warp the disc. Place blocks under the wheel so that the disc does not touch the ground.