Balance inspection
Remove the wheel.
Support the wheel so that it can be spun freely.
Spin the wheel lightly, and mark [A] the wheel at the top when the wheel stops.
![](https://motoinstruction.ru/img/kawasaki/13/119206.jpg)
Repeat this procedure several times. If the wheel stops of its own accord in various positions, it is well balanced.
★ If the wheel always stops in one position, adjust the wheel balance.
Balance adjustment
If the wheel always stops in one position, provisionally attach a balance weight [A] on the wheel.
Attach a balance weight loosely to the spoke under the marking.
Rotate the wheel 1/4 turn [B], and see whether or not the wheel stops in this position. If it does, the correct balance weight is being used.
![](https://motoinstruction.ru/img/kawasaki/13/119207.jpg)
★ If the wheel rotates and the weight goes up, replace the weight with the next heavier size.
★ If the wheel rotates and the weight goes down, replace the weight with the next lighter size.
Repeat these steps until the wheel remains at rest after being rotated 1/4 turn.
Rotate the wheel another 1/4 turn and then another 1/4 turn to see if the wheel is correctly balanced.
Repeat the entire procedure as many times as necessary to achieve correct wheel balance.
Install the balance weight firmly on the wheel.
Clamp on the balance weight firmly using pliers [A].
![](https://motoinstruction.ru/img/kawasaki/13/119208.jpg)
Balance weight
Part Number | Weight |
41075-0011 | 10 g (0.35 oz) |
41075-0012 | 20 g (0.70 oz) |
41075-0013 | 30 g (1.06 oz) |