- Remove the right frame head cover and right radiator cover. (9-6)
- Place the motorcycle on a level surface.
- Remove the brake fluid reservoir cap 1 and diaphragm.
- Drain the old brake fluid as much as possible.
- Fill the reservoir with new brake fluid.
- Connect a clear hose to the caliper air bleeder valve and insert the other end of hose into a receptacle.
- Loosen the air bleeder valve and pump the brake pedal until old brake fluid flows out of the bleeder system.
- Close the caliper air bleeder valve and disconnect a clear hose. Fill the reservoir with new fluid to the upper mark of the reservoir.
Specification and classification: DOT 4
Caution: Bleed air from the brake system. (2-26)