Tighten initially at 1 000 km (600 miles, 2 month) and every 6 000 km (4 000 miles, 12 months) thereafter.
Check that all chassis bolts and nuts are tightened to their specified torque. (Refer to page 2-29 for the locations of the following nuts and bolts on the motorcycle.)
| ITEM | N·m | kgf·m | lb·ft |
| 1. Steering stem head nut | 90 | 9.0 | 65.0 |
| 2. Steering stem lock-nut | 80 | 8.0 | 58.0 |
| 3. Front fork upper clamp bolt | 23 | 2.3 | 16.5 |
| 4. Front fork lower clamp bolt | 23 | 2.3 | 16.5 |
| 5. Front axle | 65 | 6.5 | 47.0 |
| 6. Front axle pinch bolt | 23 | 2.3 | 16.5 |
| 7. Handlebar clamp bolt | 23 | 2.3 | 16.5 |
| 8. Front brake master cylinder mounting bolt | 10 | 1.0 | 7.0 |
| 9. Front brake caliper mounting bolt | 39 | 3.9 | 28.0 |
| 10. Brake hose union bolt | 23 | 2.3 | 16.5 |
| 11. Air bleeder valve (Front) | 7.5 | 0.75 | 5.5 |
| 12. Air bleeder valve (Rear) | 6 | 0.6 | 4.3 |
| 13. Brake disc bolt (Front & Rear) | 23 | 2.3 | 16.5 |
| 14. Rear brake caliper mounting bolt | 22 | 2.2 | 16.0 |
| 15. Rear brake master cylinder mounting bolt | 10 | 1.0 | 7.0 |
| 16. Rear brake master cylinder rod lock-nut | 18 | 1.8 | 13.0 |
| 17. Front footrest bracket mounting bolt | 25 | 2.5 | 18.0 |
| 18. Swingarm pivot nut | 100 | 10.0 | 72.5 |
| 19. Swingarm pivot lock-nut | 90 | 9.0 | 65.0 |
| 20. Rear shock absorber mounting nut (Upper & Lower) | 50 | 5.0 | 36.0 |
| 21. Cusion lever nut | 78 | 7.8 | 56.5 |
| 22. Cusion rod nut | 78 | 7.8 | 56.5 |
| 23. Rear axle nut | 100 | 10.0 | 72.5 |
| 24. Seat rail mounting bolt | 50 | 5.0 | 36.0 |
